Category Archives: news

• 

  Custom Gearbox with Mounting Frame

  Posted on January 10, 2020 by Terry McCormick in news.

  Rj Link received a request from a customer wanting to mount a gearbox horizontally.  The mounting frame was needed to hold the gearbox in place.  Some might feel that designing a simple mounting bracket is not a core competency when designing and manufacturing custom gearboxes.  Rj Link’s engineering team understands that the solution isn’t solely […]

  Continue Reading...
  Comments Off on Custom Gearbox with Mounting Frame
• 

  Unique Features of Custom Gearboxes

  Posted on January 9, 2020 by Terry McCormick in news.

  WHAT GOES INTO THE DESIGN PROCESS OF A CUSTOM GEARBOX?   Some of the unique features that are reviewed in the Rj Link process: Advanced design methodology for custom gearboxes Improved surface finish with formed tooth grinding & dressable wheels Material cleanliness Housing is designed for rotor stability and noise reduction Superior bearing design Customer interface with […]

  Continue Reading...
  Comments Off on Unique Features of Custom Gearboxes
• 

  Speed Reducer for Centrifugal Pump Application

  Posted on January 8, 2020 by Terry McCormick in news.

  Features:  Various input and output shaft configurations, tapered shaft & SAE bell housing with clutch, rubber block drive or flange connection.   Typical Application:  Centrifugal Pump   Specifications:  Ratio:  1.2:1 to 4.0:1 Max HP:  600 Input Speed (rpm):  1,800 Overall Size:  28 x 32 x 32   Learn more about other Custom Gearboxes     […]

  Continue Reading...
  Comments Off on Speed Reducer for Centrifugal Pump Application
• 

  Compressor/Booster Pump Gearboxes

  Posted on January 7, 2020 by Terry McCormick in news.

  Rj Link Int. had many inquiries this past year from people in the well service market, with many of them involving the need to go into 1,000 ft. wells.   They are basically pumping nitrogen, water, or slurry into the well to get the oil out.  These are low volume wells that produce approximately 50-125 barrels […]

  Continue Reading...
  Comments Off on Compressor/Booster Pump Gearboxes
• 

  Custom is Our Niche!

  Posted on January 6, 2020 by Terry McCormick in news.

  Rj Link International – Your Go-To Solution for Custom Gearboxes & More!

  Continue Reading...
  Comments Off on Custom is Our Niche!
• 

  Rj Link Helping to Promote Manufacturing to Students

  Posted on December 30, 2019 by Terry McCormick in news.

  One of the biggest challenges in the Manufacturing Industry is finding skilled and interested workers. The future of the industry is going to be heavily dependent on training people for the jobs that will keep companies competitive in the future. Rj Link Int., and other local manufacturers are partnering with the Rockford Public School District […]

  Continue Reading...
  Comments Off on Rj Link Helping to Promote Manufacturing to Students
• 

  Gearbox Gravity Lubricating Process

  Posted on December 27, 2019 by Terry McCormick in news.

    Rj Link gearboxes have a “Gravity Lubricating Process”, which means customers get a gearbox that runs smooth and has an extended life.  Once the Gear-housing is filled with the recommended oil, and the unit is operating:  The lowest gear dips into the bath of oil lubricating the teeth.  Then with splashing action, and meshing of […]

  Continue Reading...
  Comments Off on Gearbox Gravity Lubricating Process
• 

  Gearboxes for Airport Snowblowers Ready for Shipment

  Posted on December 23, 2019 by Terry McCormick in news.

  As many of you are start your travels for the holiday week, Rj Link has a couple of reduction gearboxes that are heading out the door as well.  These gearboxes will be used in a large Airport Snowblower, and play and an important role in helping to keep the runways clear during the winter months.   […]

  Continue Reading...
  Comments Off on Gearboxes for Airport Snowblowers Ready for Shipment
• 

  Happy Holidays!

  Posted on December 18, 2019 by Terry McCormick in news.

  Rj Link International, Inc. would like to thank all of our customers, suppliers and employees who helped to make 2019 a success. We couldn’t have done it without you!  We wish you and your families a wonderful holiday season and a Happy New Year!   We will be closed Dec 24th, 25th, 31st & Jan […]

  Continue Reading...
  Comments Off on Happy Holidays!
• 

  Manufacturing & Engineering Capabilities

  Posted on December 16, 2019 by Terry McCormick in news.

    Rj Link’s manufacturing capabilities range from single piece prototype development to volume precision machining.  We manufacture components and assemblies from a variety of raw materials including bar stock, plate stock, forgings and castings. We work with a variety of customer supplied materials including proprietary castings, specialty tubing and unique forgings. We can also provide […]

  Continue Reading...
  Comments Off on Manufacturing & Engineering Capabilities